Most people don’t know much about the hobby of woodworking. They think it’s just a matter of cutting some wood, slapping it together and calling it a success. The fact is that there is more to it than that, and the tips below will guide you through the process.
Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.
Begin small with woodworking projects. It can be very exciting to get yourself ready for your first woodworking project, but don’t let your excitement overtake your smarts. Buy only what you need, no more for right now. Don’t fall for buying tools that you currently don’t need as you may find better alternatives in the future.
When sanding a piece of lumber, a lot of sawdust and debris is produced. To help remove those bits of dust and debris from your project vacuum the area. Then, remove the remaining debris using a tack cloth. Wipe both sides of the lumber to remove all traces of debris for best results.
When sanding a piece of lumber, beginning with a coarse sandpaper. Remove the excess dust from the lumber. Then, once the largest scratches are removed, sand again with a smoother sandpaper. Follow this sanding with a tack cloth. Continue using smoother sandpaper until the lumber feels smooth when you run your hand across it.
When learning a new woodworking technique, practice it over and over again. Repetition is the best way to learn these skills. So find some cheap wood (scrap wood works), and go at it for some time to hone your skills. This will make it so you’re less likely to make mistakes during important projects.
Whenever you work with power tools, be sure your clothing is tucked in properly. Any loose clothing or long, dangling hair or jewelry can easily become tangled in the tool, leading to injury or other disaster. Tuck everything in, pull back your hair, take off dangling jewelry and then get down to work.
Do not make the mistake of buying woodworking supplies based on the price alone. This can turn out to be a mistake that will cost you more in the end. If the supplies you buy are not very good quality, they will wear out sooner than more expensive tools, which means you will have to replace them much sooner.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
As you learn more about woodworking, you’ll find that things become easier. You’ll be able to plan out your projects better, complete them on time and have end results which are impressive. Use this new knowledge to make your hobby the best it has ever been, time and time again.