When it comes to woodworking, as a hobby or as a job, everyone can get involved. Whether building a birdhouse or a mansion, or creating a fence or filigree, there is a level of participation anyone can enjoy. Learning all you can about the field is key, so start by reading all of the great tips in this article.

Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.

Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.

Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.

If you have your own table saw, you will eventually have to crosscut some wood. This can bring your fingers very close to the saw guard and blade. If the saw kicks back, you could be headed to the hospital. It is best to cut a block of wood to push the wood through the saw with.

When staining woods, always test in a hard to see area before moving forward. In fact, if you’ve got a piece of scrap wood, that’s even better. You never know how a type of wood will take to stain, so it’s best to find out in a place that won’t be an issue later on.

You can prevent glue stains by placing masking tape along the joints of wood being adhered. First, tape the wood together along the joint, then use an Exacto knife to cut through the tape at the joint line. Following this, glue the pieces of wood together and clamp them. Just before the glue has dried completely, you can peel the tape off.

Make accurate lines and measurements by using a drafting square instead of a drywall square, yardstick or ruler. Drafting squares are smaller and easier to manage and are much more accurate than any of these tools. This is a handy tool to keep at your side because it is smaller. Additionally, drafting squares are very affordable, selling for about five bucks at any art supply store.

With all of this great information in mind, you are ready to build anything your mind can dream up. Use these tips one by one to make woodworking the amazingly enjoyable experience you’ve yearned for. In time, you will find that you get better at it and the items you produce become exceptional.